Iscsi Initiator Properties-Target Portals; Ip Iscsi Window-Initiators Tab - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Hp storageworks c-series iscsi configuration guide (aa-rw7pe-te, december 2006)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

• Socket
4.
Click OK.
The IP address is added to the Available Portals list
The iSCSI Initiator connects to the C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol
Services Module (14/2),, or MDS 9216i switch.
The C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2), or
MDS 9216i switch generates a unique WWPN for the iSCSI initiator's IP address.
Figure 6 iSCSI Initiator Properties—Target Portals
You can verify the iSCSI connection and WWPN mapping on the IP Storage Services Modules (IPS-4,
IPS-8), Multi-protocol Services Module (14/2), and MDS 9216i switch two ways:
With the Device Manager GUI:
Select IP > iSCSI.
The IP iSCSI window appears
Figure 7 IP iSCSI window—Initiators tab
18
(Figure
(Figure
7).
6).

Advertisement

Table of Contents
loading

Table of Contents