Ip Http Authentication - Cisco 300 Series Cli Manual

Authentication, Authorization and Accounting (AAA) Commands
78-21075-01 Command Line Interface Reference Guide
Syntax
enable authentication
no enable authentication
Parameters
•
default—Uses the default list created with the
command.
•
list-name—Uses the specified list created with the
enable command.
Default Configuration
The default is the aaa authentication enable
Command Mode
Line Configuration mode
Examples
Example 1 - The following example specifies the authentication method as the
default method when accessing a higher privilege level from a console.
switchxxxxxx(config)#
switchxxxxxx(config-line)#
Example 2 - The following example sets a list of authentication methods for
accessing higher privilege levels.
switchxxxxxx(config)#
switchxxxxxx(config)#
switchxxxxxx(config-line)#
17.5

ip http authentication

The ip http authentication Global Configuration mode command specifies
authentication methods for HTTP server access. Use the no form of this command
to restore the default authentication method.
{default | list-name}
line console
enable authentication default
aaa authentication enable enable-list radius none
line console
enable authentication enable-list
aaa authentication enable
aaa authentication
command default.
17
253