Auxiliary Hydraulic Valve, Dumping Valve And Front Block (Relief Valve) Disassembly And Assembly; Valve Removal - Ezgo 1600xd Repair Manual

HYDRAULIC SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY
2. Remove the rear cover (1), seal block (2), drive
gear shaft (3), driven gear (4), seal block (5) and
case (6) in order. If necessary, remove the snap
ring and oil seal in the case.
3. Assemble in the reverse order of disassembly.
4. When installing the seal block, make sure that its
opening is toward the mark "IN" (marked on the
back of the rear case) and the seal attaching sur-
face is toward the opposite of the gear.
SUUV-W00 Apr. 2011
UUVWB17A
Seal attaching surface
UUVWB19A
5.2 AUXILIARY HYDRAULIC VALVE, DUMPING
VALVE AND FRONT BLOCK (RELIEF VALVE)
DISASSEMBLY AND ASSEMBLY

5.2.1 VALVE REMOVAL

1. Park the vehicle on level ground, stop the engine
and apply the parking brake.
2. Disconnect the double acting cable (2) from the
adapter (1) and unscrew the mounting bolts (3) (M8,
2 EA) to remove the cover (4) and double acting
valve.
UUVWB21A
UUVWB39A
11
-21