Disassembly, Service And Assembly; Engine Removal - Ezgo 1600xd Repair Manual

6. DISASSEMBLY, SERVICE AND ASSEMBLY

6.1 ENGINE REMOVAL

1. Park the vehicle on level ground, stop the engine,
and then apply the parking brake.
2. Unscrew the four battery cover mounting screws
(M6, 1), remove the side cover, and disconnect the
negative battery cable.
3
-52
ENGINE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW223A
UUVW224A
3. Unscrew the four lower screen mounting screws
(M5, 1) and remove the lower screen. Then, place
a container under the rear of the radiator and un-
screw the drain cock (2) of the radiator to drain the
coolant.
4. Remove the seat (1) by pulling its rear section up-
ward. Then, unscrew the seven seatback screws
(M6) to remove the seatback (2).
UUVW225A
UUVW226A
UUVW227A
SUUV-W00 Apr. 2011