Rear Axle Case Disassembly And Assembly - Ezgo 1600xd Repair Manual

5.2 REAR AXLE CASE DISASSEMBLY AND ASSEMBLY

1. Unscrew the rear axle case mounting bracket bolts
(1) (M10, 13 EA) using the 14 mm socket wrench to
remove the brackets (LH/RH).
IMPORTANT
• Apply LOCTITE #242 or equivalent to the bolt
threads before installing the bolt. Be careful no
to miss the bushings that are inserted in the two
upper and two lower bracket mounting holes.
• When installing the bracket (LH) (1) to the rear
axle case, clean its mating surface and apply
Three Bond 1206D or equivalent on it.
SUUV-W00 Apr. 2011
REAR AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW625A
UUVW626A
2. Pull out the differential lock shifter (1) and unscrew
the rear axle case mounting bolts (2) (M8, 7 EA)
using the 12 mm spanner to remove the rear axle
case cover (3).
Bolt (M8)
tightening torque ............ 17.6 ~ 20.6 Nm
3. Separate the differential system assembly from the
rear axle case.
UUVW627A
UUVW628A
1.8 ~ 2.1 kgf-m
13.0 ~ 15.1 lb-ft
UUVW629A
7
-17