Ezgo 1600xd Repair Manual page 235

참고
REMARK
•
•
•
•
•
•
•
•
•
•
•
• Only the CV joint (1) on the differential case side
can be removed.
• The CV joint (2) on the wheel side is pressed in
and cannot be removed.
• Remove the CV joint on the differential case side,
and then remove the two boots.
• When installing the CV joint, the larger opening
of the bearing cup should be inserted into the
housing fi rst.
IMPORTANT
• Drive shaft housing stop ring mounting location
Housing
• Make sure that the opening of the stop ring seats
on the protrusion of the drive shaft housing.
7. Fit the rubber bellows to the housing and secure it
with the band.
SUUV-W00 Apr. 2011
REAR AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW681A
Stop ring
UUVW659A
IMPORTANT
• When installing the rear axle drive shaft to the
rear axle case, be careful not to miss the O-ring
and make sure to apply grease on it.
UUVW624A
7
-25