Ezgo 1600xd Repair Manual page 302

STEERING SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY
4. Remove the steering wheel cap (1) and unscrew the
wheel mounting nut (M12, 1 EA) using the 17 mm
socket wrench to remove the steering wheel.
Mounting nut
tightening torque ...................48.0 ~ 55.9 Nm
REMARK
Forward
• When installing the steering wheel, set the front
wheel in the straight forward direction and fi t the
steering wheel in the straight ahead direction as
shown in the fi gure.
10
-10
UUVW916A
4.9 ~5.7 kgf-m
35.3 ~ 41.2 lb·ft
5.
UUVW917B
UUVW918A
UUVW920A
Unscrew the panel mounting screws (1) (M8, 8 EA) to
remove the panel. (Screws - under hood: 2 EA (LH)/ 2
EA (RH), side of body: 1 EA (LH)/1 EA (RH), center of
panel: 1 EA, in console box: 1 EA)
UUVW919A
UUVW921A
SUUV-W00 Apr. 2011