Ezgo 1600xd Repair Manual page 332

HYDRAULIC SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY
6. Push the top of the detent ball with a tool to pass it
through the three balls in the spool. Then, tighten
the detent housing completely.
7. Fit the tool to the lever and lift the tool in the arrow
direction completely. Then, unscrew the adapter (1)
until the lever is not returned but fi xed to the lifted
position (detent position).
8. Install the adjusting screw (1) and lower the lever
so that it can return. Then, secure it with the adjust-
ing nut (2).
9. Tighten the adapter mounting nut (3) completely.
11
-28
REMARK
UUVWB65A
• Turning the adjusting screw (1) counterclockwise
increases the spool moving range, resulting
in more oil flow and increase in the cargo bed
lifting speed. Reversely, screwing it in clockwise
decreases the spool moving range, resulting in
less oil flow to slow down the cargo bed lifting
speed.
UUVWB66A
UUVWB67A
UUVWB68A
SUUV-W00 Apr. 2011