Gear Case Disassembly And Reassembly (Gear Case Gasket, Crankshaft Oil Seal And Oil Pump Replacement) - Ezgo 1600xd Repair Manual

6.5 GEAR CASE DISASSEMBLY AND REASSEMBLY (GEAR CASE GASKET, CRANKSHAFT OIL
SEAL AND OIL PUMP REPLACEMENT)
1. Park the vehicle on level ground, apply the parking
brake, stop the engine and disconnect the negative
battery cable.
2. Unscrew the drain plug (1) from the bottom of the
engine oil pan to drain the engine oil.
3. Open the radiator drain cock to drain the coolant.
(See 6.1 "Engine removal.")
4. Lift and support the cargo bed and remove the
seat.
SUUV-W00 Apr. 2011
ENGINE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW2B8A
UUVW2G6A
5. Unscrew the fuel tank fi ller cap (1) as well as the
fender (mid, RH) mounting screws (2) to remove
the fender (mid, RH).
6. Disconnect the fuel supply hose (1) to drain the
fuel. Then, disconnect the fuel overflow pipe (2)
and fuel sender connector (3) and unscrew the four
fuel tank mounting bracket mounting bolts (M8, 4)
using the 12 mm spanner to remove the fuel tank.
UUVW2C1A
UUVW2C2A
3
-79