7.
Assemble in the reverse order of disassembly.
8.
When assembling the components, tighten the
brake disc mounting bolts first to install the disc.
Then, fi t the spring pin to secure the propeller shaft.
REMARK
•
When installing a new propeller shaft, apply grease
to the grease nipple (1) on the cross-bearing
side suffi ciently.
(Grease: NLGL grade No. 2 or equivalent)
SUUV-W00 Apr. 2011
REAR AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW675A
7
-29