Ezgo 1600xd Repair Manual page 94

CAUTION
• When installing the internal CVT cover, remove
any Three Bond residual from the mating surface
of the flywheel's engine installation plate and
apply a suffi cient amount of Three Bond 1206D or
equivalent to the cover surface before installation
to prevent leakage.
16. Unscrew the four engine mounting bracket mount-
ing bolts (M10, 1) as well as the two front mounting
rubber mounting bolts (M12, 2) and ground wiring
mounting bolt (3). Then, disconnect the ground wir-
ing (4). (14mm, 17mm)
3
-56
ENGINE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW245A
UUVW246A
UUVW247A
17. Remove the engine by hooking a hoist to the hook
on the cylinder head.
REMARK
• Engine coolant change (replenishment)
1. Park the vehicle on level ground.
UUVW250A
2. Open the coolant filler cap (1) and unscrew
the drain cock (2) under the radiator and the
drain plug (3) of the cylinder block. Drain the
coolant completely and install the cap, cock
and plug.
UUVW248A
UUVW249A
UUVW251A
SUUV-W00 Apr. 2011