▶
ASSEMBLY
1.
Put the differential washer (1) into the differential
case. Then, install the differential side gear (2).
2.
Fit the differential pinion washer (1) to the groove
from the differentia case side without a spring pin
hole. Then, pass the differential pinion shaft (2)
through and install the differential pinion (3), differ-
ential pinion for the other side and differential pinion
washer in order.
SUUV-W00 Apr. 2011
REAR AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW640A
UUVW641A
IMPORTANT
•
Make sure that the washer protrusion of the
differential pinion is seated to the groove of the
differential case.
3.
Align the spring pin hole of the differential pinion
shaft with the hole of the differential case, turn the
case upside down and tap the spring pins (1) into
the case.
UUVW642A
S76W668A
UUVW643A
7
-21