Front Wheel Drive System Disassembly And Assembly - Ezgo 1600xd Repair Manual

TRANSMISSION - DISASSEMBLY, SERVICE AND ASSEMBLY

5.5 FRONT WHEEL DRIVE SYSTEM DISASSEMBLY AND ASSEMBLY

1. When necessary, remove the shift arm (6) and front
wheel drive lock fork (7) by unscrewing the front
wheel drive lever mounting nut (1) (M10, 1 EA),
removing the shift arm (2) and spring (3) and then
pulling out the lock plate mounting bolt (4) and shift
arm spring pin (5).
Make sure not to miss the O-ring (8) and check its
status. If it is damaged, replace it with a new one.
Be sure to inspect the O-ring (8). Replace it with a
new one if damaging. And apply a small amount of
lubricant to it before installing.
5
-24
UUVW430A
UUVW431A
.
REMARK
• When installing the front wheel drive lever and
spring, make sure the mark "4WD" and spring
hook groove face upward.
UUVW432A
SUUV-W00 Apr. 2011