Use Of Appropriate Tools And Equipment; Handling Of Hazardous Materials - Ezgo 1600xd Repair Manual

2.7 USE OF APPROPRIATE TOOLS AND
EQUIPMENT
• Use the standard tools in proper size. If an inap-
propriate tool is used, it can slip which can damage
parts or injure you.
• Do not confuse units (mm, inch, etc.). Use the air
impact wrench only when unscrewing the bolts or
nuts. Such wrench should not be used especially
when assembling precisely machined parts which
its tightening torque should be strictly followed. It
can cause malfunctions.
• Be careful of a socket popped out due to the turning
force when using the air impact wrench. Especially,
be extra cautious when working on connection or
socket with joint.
• When lifting the tractor with a hydraulic jack or a
hoist, fix it firmly and install the auxiliary support.
Never work under the tractor if the support and the
hydraulic jack (hoist) are not installed.
• When using a hydraulic jack or a hoist, do not use
it over the limit of the equipment and the conveying
belt.
• Make sure that the hydraulic lock operates properly
before used. Improper use of lock can cause a seri-
ous accident.
• Check the buttons and operating direction of the
hoist before using it. Improper operation can cause
a serious accident.
• Do not use wooden blocks or bricks as support un-
der the tractor. As the tractor's weight is continuous-
ly applied to them, they can be broken or collapsed.
1
-6
SAFETY FIRST - SAFETY TIPS

2.8 HANDLING OF HAZARDOUS MATERIALS

• Do not blow out hazardous materials, such as clutch
dust, with compressed air. Inhaling such hazardous
materials can damage your health.
REMARK
All DAEDONG's genuine parts do not contain asbestos.
• These materials should be rinsed or wiped away
after sprayed with oil.
S76W022A
SUUV-W00 Apr. 2011