Front Axle Knuckle Assembly Disassembly And Assembly (Front Knuckle Replacement) - Ezgo 1600xd Repair Manual

2. Remove the spring seating plate (2), spring (3), spring
seating plate (4), clutch discs (5), clutch plates (6) and
case (7) in order.
3. Assemble in the reverse order of disassembly.
4. When installing the clutch plates, align their spline
grooves.
REMARK
• When disassembling the clutch assembly, proper
tools, such as a spring compressor, should be
used to remove the snap ring due to high spring
tension.
SUUV-W00 Apr. 2011
FRONT AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW857A
5.7 FRONT AXLE KNUCKLE ASSEMBLY
DISASSEMBLY AND ASSEMBLY
(FRONT KNUCKLE REPLACEMENT)
1. Remove the knuckle assembly (1). (Refer to "Front
axle disassembly.")
2. Unscrew the mounting nut (4) with the 19 mm spanner
and remove the washer (5), rubber spacer (6), upper
mounting ball (7) and lower mounting ball (8) in order.
UUVW879A
UUVW880A
UUVW860A
9
-23