Steering Column Removal And Installation - Ezgo 1600xd Repair Manual

STEERING SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY
5. Remove the cap (1) and pull out the pinion shaft (2).
6. Remove the rack (1) by pulling it to the side.
7. Assemble in the reverse order of disassembly.
REMARK
• When removing the cap, be careful not to damage
the oil seal. If a new oil seal is to be fi tted, apply
grease to its mating surface.
• During assembly, apply grease to the engaging
sections of the gears and in the case suffi ciently.
SUUV-W00 Apr. 2011
5.2 STEERING COLUMN REMOVAL AND
INSTALLATION
UUVW910A
1. Open and support the hood, disconnect the headlamp
connector (1) and unscrew the ratchet mounting bolts
(2) (M8, 4 EA) to remove the hood.
UUVW911A
2. Disconnect the connectors for the instrument cluster
(1), power supply, ignition switch and combination
switch (2).
UUVW912A
3. Unscrew the screws for the selective shift lever (1),
differential lock lever (2) and front wheel drive lever (3)
and remove their grips.
UUVW561A
UUVW914A
UUVW915A
10
-9