Injection Nozzle - Ezgo 1600xd Repair Manual

4. Remove the valve stem seal (1).
5. Install in the reverse order of removal.
6. When installing the valve, apply oil to the valve
stem and install in the cylinder head.
7. Lubricate the valve and its related parts after instal-
lation.
IMPORTANT
• Do not re-use valve stem seal.
• Be careful not to interchange the valves and
related components.
• M a r k t h e c y l i n d e r n u m b e r s t o t h e r e l a t e d
components to prevent them from interchanging.
SUUV-W00 Apr. 2011
ENGINE - DISASSEMBLY, SERVICE AND ASSEMBLY
S76W2O5A

6.3.3 INJECTION NOZZLE

1. Fix the nozzle nut and unscrew it to remove it.
2. Remove the nozzle holder (1), adjusting washer (2),
nozzle spring (3), push rod (4), distance piece (5),
nozzle (6) and nozzle nut (7) in order.
3. Install in the reverse order of removal.
Nozzle holder
tightening torque ............ 49.0 ~ 68.6 Nm
Nozzle nut
tightening torque ............ 29.4 ~ 49.0 Nm
S76W2O6A
5.0 ~ 7.0 kgf-m
36.1 ~ 50.6 lb-ft
3.0 ~ 5.0 kgf-m
21.7 ~ 36.1 lb-ft
3
-71