Ezgo 1600xd Repair Manual page 258

4. When the brake fl uid is drained through the bleed-
ing pipe, there are air bubbles in the fl uid. Drain the
brake fluid until there is no bubbles. Then, tighten
the bleeding pipe and close the cap (1).
5. Bleed the front and rear brakes with the same proce-
dures.
REMARK
• The brake line bleeding work should be performed
by more than one person.
• Bleed the line from the caliper farthest from the
driver's seat.
IMPORTANT
• Make sure that the brake fl uid level in the brake
fluid reservoir does not fall below the MIN line
during bleeding the brake line.
• Make sure to fi ll the brake fl uid reservoir up with
the brake fl uid to the MAX line after bleeding the
brake line.
8
-14
BRAKE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW716A
SUUV-W00 Apr. 2011