Ezgo 1600xd Repair Manual page 181

TRANSMISSION - DISASSEMBLY, SERVICE AND ASSEMBLY
3. When reassembling these components, insert the
16 gear (1) to the shift guide lever and set the 33
gear (2) to the shaft with the gear boss toward the
case so that the marks are aligned.
CAUTION
• When installing the 16 gear (1) and 33 gear (2),
make sure that the marks on their surfaces are
aligned.
4. Fit the spacer to the shift guide lever. Then, fi t the
shift disc (1).
SUUV-W00 Apr. 2011
UUVW439A
5. Install the lock arm (1) and spring (2) to the shaft.
6. Apply a suffi cient amount of grease to the shift gear
installing area before installing the shift cover.
IMPORTANT
UUVW438A
• When installing the 46 gear and shift disc to the
shift guide lever or installing the 33 gear to the
shaft, make sure to align the serration alignment
section.
UUVW440A
UUVW442A UUVW443A
UUVW444A UUVW445A
UUVW441A
5
-23