Ezgo 1600xd Repair Manual page 150

7. Unscrew the CVT drive pulley mounting bolt (1)
and CVT driven pulley mounting bolt (2) and fi t the
removal tool into the CVT drive pulley bolt hole.
Then, turn the tool to remove the CVT drive pulley
(3) and belt, and leverage the CVT driven pulley (4)
to remove it.
CVT drive pulley mounting bolt
tightening torque ............ 54 Nm
CVT driven pulley mounting bolt
tightening torque ............ 24.5 Nm
4
-12
CVT - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW339A
UUVW240A
5.5 kgf-m
40 lb-ft
2.5 kgf-m
18.0 lb-ft
IMPORTANT
• Apply LOCTITE #242 or equivalent to the mounting
bolts of CVT drive and driven pulleys before
installing them.
REMARK
• REMOVAL TOOL FOR CVT DRIVE PULLEY
Part number : UCVT-P10
19
9 /16 -18
40
130
20 172
8. Unscrew the CVT internal case mounting bolts (1)
(M8, 8 EA) using a 13 mm box wrench and remove
the CVT internal case (2).
UUVW241A
mm.
135
UUVW307A
UUVW340A
SUUV-W00 Apr. 2011