Cv Joint Boot Replacement - Ezgo 1600xd Repair Manual

7. Unscrew the front axle drive shaft bearing holder
mounting bolts (1) (M8, 3 EA) using the 12 mm socket
wrench and pull the front axle drive shaft to remove it
as an assembly.
SUUV-W00 Apr. 2011
FRONT AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW821A
UUVW822A

5.2 CV JOINT BOOT REPLACEMENT

1. Remove the O-ring (1) and snap ring (2) from the front
axle drive shaft assembly. Then, tap the bearing hold-
er to remove the ball bearing (3) and bearing holder (4).
2. Undo the rubber bellows mounting band (1) and re-
move the rubber bellow. Then, remove the stop ring (2)
from the opening of the drive shaft housing to remove
the ball joint (3) as one unit.
UUVW823A
UUVW824A
UUVW825A
9
-15