Ezgo 1600xd Repair Manual page 92

10. Unscrew the four heat shield mounting bolts (M6, 1)
to remove the heat shield. Then, unscrew the four
muffler pipe mounting bolts (M8) and two muffler
pipe mounting nuts (M10, 2) and disconnect the
spring to remove the muffl er pipe. (10mm, 14mm)
11. Unscrew the battery mounting nuts (1) to remove
the battery.
3
-54
ENGINE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW2G3A
UUVW235A
12. Undo the clamps for the CVT intake hose (1) and
disconnect the intake hose.
13. Unscrew the nine CVT cover mounting bolts (M6, 1)
to remove the CVT cover.
UUVW2G4A
UUVW2G5A
SUUV-W00 Apr. 2011