Ezgo 1600xd Repair Manual page 175

TRANSMISSION - DISASSEMBLY, SERVICE AND ASSEMBLY
REMARK
• The 46 gear (1) (A) cannot be removed from the
driven shaft assembly; it is shrink-fitted with
heat.
8. Remove the ball bearings (1) from the drive shaft
assembly on both sides.
REMARK
• The 31 gear (2) cannot be removed from the
drive shaft assembly; it is shrink-fi tted with heat.
9. Assemble in the reverse order of disassembly.
SUUV-W00 Apr. 2011
CAUTION
UUVW449A
• When installing the fork, its longer bosses (A)
should be in the splined direction.
IMPORTANT
• When installing the cover, front wheel drive
cover and shift cover to the transmission
case, clean their mating surfaces thoroughly
and apply liquid gasket (Three Bond 1206D or
equivalent) to them in advance.
UUVW450A
UUVW451A
5
-17