Inspection And Adjustment; Tie-Rod Length Adjustment; Toe-In Adjustment - Ezgo 1600xd Repair Manual

4. INSPECTION AND ADJUSTMENT

4.1 TIE-ROD LENGTH ADJUSTMENT

1. When installing the steering gearbox assembly to
the vehicle, the tie-rod length A and B should be set
correctly in advance.
A : 381.8 mm (15.03 in.)
B : 420.1 mm (16.54 in. )
2. Unscrew the tie-rod end mounting nut (1), turn the
tie-rod end to set its length correctly, and tighten
the mounting nut fi rmly.
SUUV-W00 Apr. 2011
STEERING SYSTEM - INSPECTION AND ADJUSTMENT
UUVW905A
UUVW926A

4.2 TOE-IN ADJUSTMENT

1. Adjust the toe-in so that the distance between the
front of the front wheels is 2 ~ 8 mm (0.079 ~ 0.315
in.) shorter than the distance between the rear of
the front wheels.
2. To adjust the distance, unscrew the tie-rod end
mounting nut and turn the tie-rod end.
3. For detailed instructions, refer to "Toe-in adjust-
ment" in chapter 9 "Front Axle."
10
-7