TRANSMISSION - DISASSEMBLY, SERVICE AND ASSEMBLY
SUUV-W00 Apr. 2011
6.
Unscrew the ball bearing holder mounting screws (1)
(M8, 4 EA) to remove the holder (2).
Mounting screw (M8)
tightening torque ............ 7.8 ~ 15.7 Nm
CAUTION
•
When installing the ball bearing holder mounting
screws, apply LOCTITE #242 or equivalent to
their threads in advance.
UUVW434A
7.
Remove the adjusting shim (1) and tap out the spi-
ral bevel pinion shaft assembly from inside the case
outward. Then, remove the snap ring (2), spacer (3),
ball bearing (4), adjusting shim (5) and spiral bevel
pinion shaft (6) in order.
UUVW435A
0.8 ~ 1.6 kgf-m
5.8 ~ 11.5 lb-ft
UUVW436A
5
-21