Engine Component Disassembly And Assembly; Rocker Arm; Intake And Exhaust Valves - Ezgo 1600xd Repair Manual

6.3 ENGINE COMPONENT DISASSEMBLY AND ASSEMBLY

6.3.1 ROCKER ARM

1. Pull out the snap ring (1) at the end from the rocker
arm assembly and disassemble the plain washer (2),
rocker arm (3), rocker arm support (4), rocker arm
(5) and spring (6) in order.
2. Reinstall the rocker arm assembly. And then, adjust
the valve clearance.
(Refer to 5.7.1 Intake and exhaust valves clearance
adjustment)
IMPORTANT
Bolt
Rocker arm shaft
To tighten the rocker arm support bolt, the groove
on the rocker arm shaft should face the bolt.
3
-70
ENGINE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW298A
T46W2J0A

6.3.2 INTAKE AND EXHAUST VALVES

1. Remove the valve collet (1) with screw driver while
pushing down the valve spring retainer with a ring
spanner.
2. Remove the valve spring (2) and its retainer (3).
3. Push the intake (1) and exhaust valve (2) out from
the upper head part.
S76W2O2A
S76W2O3A
S76W2O4A
SUUV-W00 Apr. 2011