Ezgo 1600xd Repair Manual page 89

Specifi ed
Clearance
value
between outer
rotor and
Allowable
inner rotor
limit
Specifi ed
Clearance
value
between
outer rotor
Allowable
and housing
limit
▶
END CLEARANCE OF ROTOR IN OIL PUMP
1. Place a plastigauge on the rotor and assemble the
pump.
2. Disassemble the pump and measure the amount of
the fl atness with a scale to get the clearance.
3. If the clearance exceeds the allowable limit, replace
the pump.
Specifi ed
value
End
clearance
Allowable
limit
SUUV-W00 Apr. 2011
ENGINE - INSPECTION AND ADJUSTMENT
0.11 ~ 0.15 mm
(0.0043 ~ 0.0059 in.)
0.20 mm
(0.0079 in.)
0.07 ~ 0.15 mm
(0.0028 ~ 0.0059 in.)
0.25 mm
(0.0098 in.)
T46W2F0A
0.08 ~ 0.13 mm
(0.00315 ~ 0.00512 in.)
0.20 mm
(0.0079 in.)
3
-51