Hood, Panel, Fl Oor And Radiator Removal - Ezgo 1600xd Repair Manual

3.3 HOOD, PANEL, FLOOR AND RADIATOR REMOVAL
1. Disconnect the headlamp connector (1) and un-
screw the hood mounting bolts (2) on the left and
right to remove the hood.
2. Remove the steering wheel cover and unscrew the
mounting nut (1) to remove the steering wheel. The
unscrew the grip mounting screws to remove the
grips (2) for the shift levers.
• Steering wheel mounting
nut tightening torque .........................48.0 ~ 55.9 Nm
SUUV-W00 Apr. 2011
CHASSIS - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW561A
UUVW542A
4.90 ~ 5.7 kgf-m
35.3 ~ 41.0 lb-ft
3. Unscrew the panel mounting screws (1) (LH/RH)
from the hood side. Then, disconnect the connec-
tors for the instrument cluster, power take-off sock-
et, ignition key and combination switch.
4. Unscrew the panel mounting screws (1, 4 EA) from
the seat side and pull the panel up to remove it.
UUVW543A
UUVW544A
UUVW545A
6
-9