Ezgo 1600xd Repair Manual page 391

ELECTRIC SYSTEM - DIAGNOSIS AND TROUBLESHOOTING
WIRE CONTACT CHECK
Shake it gently.
LOOSE PRONG CHECK
Bent Standard
CONNECTOR CHECK
Male terminal
Seal
Lock terminal
Intermittent contact
(hidden by harness seal)
Improperly installed connector
SUUV-W00 Apr. 2011
WIRE SEIZING CHECK
As the connector
is installed and re-
moved repeatedly,
the aperture of
contact spring can
be bent.
Properly folded
T46WB31B
Female terminal
Pull each harness at the end of
connector to check if there is
any improperly seated terminal.
Bend it gently.
Insulator not removed
Seal
T46WB33B
Tap it gently.
T46WB30A
Intermittent signal
through insulator
Missing harness
T46WB32A
12
-53