Disassembly, Service And Assembly; Gear Pump Disassembly And Assembly; Gear Pump Removal; Gear Pump Disassembly - Ezgo 1600xd Repair Manual

HYDRAULIC SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY

5. DISASSEMBLY, SERVICE AND ASSEMBLY

5.1 GEAR PUMP DISASSEMBLY AND ASSEMBLY

5.1.1 GEAR PUMP REMOVAL

1. Park the vehicle on level ground and apply the
parking brake.
2. Lift the cargo bed using the dumping operation le-
ver and stop the engine.
CAUTION
• To prevent an injury by the falling cargo bed
accidently, set the support between the cargo
bed and frame.
3. Disconnect the hose on the hydraulic flange side
from the oil tank as well as the hydraulic hose P on
the bottom of the gear pump. Then, unscrew the
mounting bolt (1) to remove the hydraulic fl ange.
4. Unscrew the gear pump mounting bolts (1) to re-
move the gear pump assembly.
REMARK
• Inspect the gasket. If it is not intact, replace it
with a new one.
11
-20

5.1.2 GEAR PUMP DISASSEMBLY

1. Unscrew the gear pump assembly mounting bolts (1).
REMARK
UUVWB15A
• Before disassembling the gear pump, mark a
mating line between the rear cover and case to
avoid faulty installation.
UUVWB16A
UUVWB18A
UUVWB20A
SUUV-W00 Apr. 2011