Combination Switch - Ezgo 1600xd Repair Manual

5.15 COMBINATION SWITCH

The combination switch is installed on the left side
from the steering wheel on the main instrument
panel.
Six switch positions:
• OFF
• Tail/Head lamp
(low beam)
• Head lamp
(high beam)
1. HEAD LAMP SWITCH:
When operating the switch to fi rst position, the head-
lamps (low beam) and tail lamps are turned on.
When operating the switch to 2nd position, the head-
lamps (high beam) and tail lamps are turned on.
When the switch is in "headlamp (high)" position, the
high beam indicator (blue lamp) comes on on the in-
strument panel.
2. TURN SIGNAL LAMP SWITCH:
The right turn signal lamp comes on when pushing the
switch up.
The left turn signal lamp comes on when pulling the
switch down.
3. HORN SWITCH:
The horn sounds when pushing it.
SUUV-W00 Apr. 2011
ELECTRIC SYSTEM - ELECTRICAL COMPONENTS
UUVWA29A
• Turn signal lamp (LH)
• Turn signal lamp (RH)
• Horn
12
-33