Ezgo 1600xd Repair Manual page 254

4. Unscrew the hexagon screws (1) from the brake
caliper and remove the mounting screws (2) using
the 6 mm hex. wrench.
5. Remove the brake pad (1) by pressing it down.
8
-10
BRAKE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW722A
UUVW723A
UUVW724A
6. If necessary, pull out the guide forward and remove
the spring.
7. For assembly, insert the spring (2) into the caliper
body (1), fi t the pads (3) to both sides and insert
the guide (4). Then, tighten the mounting screws (5)
and then tighten the hexagon screws (6).
UUVW725A
UUVW726A
SUUV-W00 Apr. 2011