Ezgo 1600xd Repair Manual page 93

14. Unscrew the CVT drive pulley mounting bolt (1) and
CVT driven pulley mounting bolt (2) and fi t the remov-
al tool into the CVT drive pulley bolt hole. Then, turn
the tool to remove the CVT drive pulley (3) and belt,
and pull out the CVT driven pulley (4) using a lever.
CVT drive pulley mounting
bolt tightening torque ........... 54 Nm
CVT driven pulley mounting
bolt tightening torque ........... 24.5 Nm
IMPORTANT
• Apply LOCTITE #242 or equivalent to the mounting
bolts of CVT drive and driven pulleys before
installing them.
SUUV-W00 Apr. 2011
ENGINE - DISASSEMBLY, SERVICE AND ASSEMBLY
UUVW238A
UUVW239A
5.5 kgf-m
40 lb-ft
2.5 kgf-m
18.0 lb-ft
REMARK
• REMOVAL TOOL FOR CVT DRIVE PULLEY
Part number : UCVT-P10
19
9 /16 -18
40
130
20 172
15. Unscrew the eight internal CVT cover mounting
bolts (M8, 1) and remove the internal CVT cover (2).
(13 mm)
UUVW241A
mm.
135
UUVW307A
UUVW244A
3
-55