Bleeding Brake Line - Ezgo 1600xd Repair Manual

IMPORTANT
• When connecting the brake pipe, place its
connector section to the mounting surface,
tighten its nut to the specified torque with an
open end wrench.
Specifi ed
torque for nut ..................16.0 ~ 21.0 Nm
REMARK
• Piston stroke: 30 ± 1 mm (1.18 ± 0.039 in.)
SUUV-W00 Apr. 2011
BRAKE - DISASSEMBLY, SERVICE AND ASSEMBLY
1.6 ~ 2.1 kgf-m
11.8 ~ 15.4 lb-ft

5.4 BLEEDING BRAKE LINE

1. Replenish the brake fluid reservoir with fluid up to
the MAX level.
2. Remove the front wheels, open the bleeding cap
from the brake caliper. Connect one end of the hose
to an empty container for the drained brake fl uid and
the other end to the bleeding pipe.
3. Loosen the bleeding pipe and depress the brake
pedal several times continuously.
UUVW714A
UUVW715A
UUVW748A
8
-13