Headlamp - Ezgo 1600xd Repair Manual

5.3 HEADLAMP

The headlamps are attached to the left and right of
the hood.
REMOVAL
1. Unscrew the hex. screws (1) from the front of the
lamp to remove the headlamp.
2. Remove the rubber cap and unscrew the screws (1)
to separate the mounting spring (2).
12
-20
ELECTRIC SYSTEM - ELECTRICAL COMPONENTS
UUVWA12A
UUVWA13A
UUVWA14A
3. Pull out the bulb.
REMARK
HEADLAMP BULB REPLACEMENT
1. Open the hood and disconnect the headlamp
connector.
2. Remove the rubber cap. Press one side of the
mounting spring and rotate it counterclockwise
to separate it. Then, pull it out to the other side.
3. Remove the bulb and fi t a new one.
• Bulb specifi cation: 12 V 55/60 W
• Do not touch the glass of new bulb.
UUVWA15A
UUVWA16A
UUVWA17A
SUUV-W00 Apr. 2011