7.
When removing the outer wheels of the taper roller
bearings from the rear axle case and rear axle case
cover, keep the adjusting shims (1) in a safe place
so that they can be fi tted back in their original con-
dition.
SUUV-W00 Apr. 2011
REAR AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
8.
Assemble in the reverse order of disassembly.
IMPORTANT
•
Apply a small amount of oil or grease to the surface
of the O-ring of the cover before installing the rear
axle case and cover. If the O-ring is damaged,
replace it with a new one.
UUVW635A
7
-19