Timer Realtime-Accounting (Hwtacacs Scheme View) - H3C MSR Series Command Reference Manual

Examples
# In HWTACACS scheme hwt1, set the server quiet timer to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10
Related commands
display hwtacacs scheme

timer realtime-accounting (HWTACACS scheme view)

Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
minutes: Specifies the real-time accounting interval in minutes, in the range of 0 to 60. Setting this
interval to 0 disables the device from sending online user accounting information to the HWTACACS
accounting server.
Usage guidelines
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is used to set the interval.
A short interval helps improve accounting precision but requires many system resources.
Table 11 Recommended real-time accounting intervals
Number of users
1 to 99
100 to 499
500 to 999
1000 or more
Examples
# In HWTACACS scheme hwt1, set the real-time accounting interval to 51 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
Real-time accounting interval
3 minutes
6 minutes
12 minutes
15 minutes or longer
137