Attribute 25 Car; Attribute Remanent-Volume - H3C MSR Series Command Reference Manual

Usage guidelines
Use the loose check method only when the server does not issue Login-Service attribute values 50,
51, and 52 for SSH, FTP, and terminal users.
Examples
# Configure the Login-Service attribute check method as loose for SSH, FTP, and terminal users in
RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] attribute 15 check-mode loose
Related commands
display radius scheme

attribute 25 car

Use attribute 25 car to configure the device to interpret the RADIUS class attribute (attribute 25) as
CAR parameters.
Use undo attribute 25 car to restore the default.
Syntax
attribute 25 car
undo attribute 25 car
Default
The RADIUS class attribute is not interpreted as CAR parameters.
Views
RADIUS scheme view
Predefined user roles
network-admin
Usage guidelines
Configure the device to interpret the RADIUS class attribute if the RADIUS server uses the attribute
to deliver CAR parameters for user-based traffic monitoring and control.
Examples
# In RADIUS scheme radius1, configure the device to interpret the RADIUS class attribute as CAR
parameters.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] attribute 25 car
Related commands
display radius scheme

attribute remanent-volume

Use attribute remanent-volume to set the data measurement unit for the Remanent_Volume
attribute.
Use undo attribute remanent-volume to restore the default.
89