Authorization Default - H3C MSR Series Command Reference Manual

authorization default

Use authorization default to specify default authorization methods for an ISP domain.
Use undo authorization default to restore the default.
Syntax
In non-FIPS mode:
authorization
radius-scheme-name ] [ local ] [ none ] | local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] [ none ] }
undo authorization default
In FIPS mode:
authorization
radius-scheme-name ] [ local ] | local | radius-scheme radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] }
undo authorization default
Default
The default authorization method of an ISP domain is local.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform authorization. The following default authorization information applies after
users pass authentication:
•
Non-login users can access the network.
•
Login users obtain the level-0 user role. For more information about the level-0 user role, see
RBAC configuration in Fundamentals Configuration Guide.
•
The working directory for FTP, SFTP, and SCP login users is the root directory of the NAS.
However, the users do not have permission to access the root directory.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The default authorization method is used for all users that support this method and do not have an
authorization method configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
You can specify one primary authorization method and multiple backup authorization methods.
When the default authorization method is invalid, the device attempts to use the backup
authorization methods in sequence. For example, the authorization default radius-scheme
radius-scheme-name local none command specifies the default RADIUS authorization method and
two backup methods (local authorization and no authorization). The device performs RADIUS
default { hwtacacs-scheme
default { hwtacacs-scheme
hwtacacs-scheme-name
hwtacacs-scheme-name
30
[ radius-scheme
[ radius-scheme