Authorization Lan-Access - H3C MSR Series Command Reference Manual

Examples
# In ISP domain test, perform local authorization for IPoE users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization ipoe local
# In ISP domain test, perform RADIUS authorization for IPoE users based on scheme rd and use
local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization ipoe radius-scheme rd local
Related commands
authorization default
local-user
radius scheme

authorization lan-access

Use authorization lan-access to specify authorization methods for LAN users.
Use undo authorization lan-access to restore the default.
Syntax
In non-FIPS mode:
authorization lan-access { local [ none ] | none | radius-scheme radius-scheme-name [ local ]
[ none ] }
undo authorization lan-access
In FIPS mode:
authorization lan-access { local | radius-scheme radius-scheme-name [ local ] }
undo authorization lan-access
Default
The default authorization methods of the ISP domain are used for LAN users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
local: Performs local authorization.
none: Does not perform authorization. An authenticated LAN user directly accesses the network.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The RADIUS authorization configuration takes effect only when authentication and authorization
methods of the ISP domain use the same RADIUS scheme.
You can specify one primary authorization method and multiple backup authorization methods.
33