H3C MSR Series Command Reference Manual page 59

authorization portal { local [ none ] | none | radius-scheme radius-scheme-name [ local ]
[ none ] }
undo authorization portal
In FIPS mode:
authorization portal { local | radius-scheme radius-scheme-name [ local ] }
undo authorization portal
Default
The default authorization methods of the ISP domain are used for portal users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
local: Performs local authorization.
none: Does not perform authorization. An authenticated portal user directly accesses the network.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
You can specify one primary authorization method and multiple backup authorization methods.
When the default authorization method is invalid, the device attempts to use the backup
authorization methods in sequence. For example, the authorization portal radius-scheme
radius-scheme-name local none command specifies the default RADIUS authorization method and
two backup methods (local authorization and no authorization). The device performs RADIUS
authorization by default and performs local authorization when the RADIUS server is invalid. The
device does not perform authorization when both of the previous methods are invalid.
Examples
# In ISP domain test, perform local authorization for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal local
# In ISP domain test, perform RADIUS authorization for portal users based on scheme rd and use
local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal radius-scheme rd local
Related commands
authorization default
local-user
radius scheme
36