Authorization Portal - H3C MSR Series Command Reference Manual

Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform authorization. The following default authorization information applies after
users pass authentication:
•
Login users obtain the level-0 user role. For more information about the level-0 user role, see
RBAC configuration in Fundamentals Configuration Guide.
•
The working directory for FTP, SFTP, and SCP login users is the root directory of the NAS.
However, the users do not have permission to access the root directory.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
You can specify one primary authorization method and multiple backup authorization methods.
When the default authorization method is invalid, the device attempts to use the backup
authorization methods in sequence. For example, the authorization login radius-scheme
radius-scheme-name local none command specifies the default RADIUS authorization method and
two backup methods (local authorization and no authorization). The device performs RADIUS
authorization by default and performs local authorization when the RADIUS server is invalid. The
device does not perform authorization when both of the previous methods are invalid.
Examples
# In ISP domain test, perform local authorization for login users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization login local
# In ISP domain test, perform RADIUS authorization for login users based on scheme rd and use
local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization login radius-scheme rd local
Related commands
authorization default
hwtacacs scheme
local-user
radius scheme

authorization portal

Use authorization portal to specify authorization methods for portal users.
Use undo authorization portal to restore the default.
Syntax
In non-FIPS mode:
35