Basic-Service-Ip-Type - H3C MSR Series Command Reference Manual

you configure the attribute in a portal preauthentication domain, the user profile applies before portal
authentication. This option is applicable only to IPoE, LAN, portal, and PPP users.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the users belong.
The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. When a user
passes authentication, it has permission to access the network resources in the specified VPN. This
option is applicable only to PPP and IPoE users.
Usage guidelines
When the idle cut feature is configured, the device periodically detects the traffic of each online user.
The device logs out users that do not meet the minimum traffic requirement in the idle timeout period.
When the idle cut feature is disabled on the device, the idle cut feature of the server takes effect. The
server considers a user idle if the user's traffic is less than 10240 bytes in a configurable idle timeout
period.
If the server or NAS does not authorize any attributes to an authenticated user, the device authorizes
the attributes in the ISP domain to the user. To specify authorization attributes in the ISP domain, use
the authorization-attribute command.
You can configure multiple authorization attributes for users in an ISP domain. If you execute the
command multiple times with the same keyword specified, the most recent configuration takes
effect.
Examples
# Configure the idle cut feature for users in ISP domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization-attribute idle-cut 30 10240
Related commands
display domain

basic-service-ip-type

Use basic-service-ip-type to specify the types of IP addresses that PPPoE and L2TP users must
rely on to use the basic services.
Use undo basic-service-ip-type to restore the default.
Syntax
basic-service-ip-type { ipv4 | ipv6 | ipv6-pd } *
undo basic-service-ip-type
Default
PPPoE and L2TP users do not rely on any types of IP addresses to use the basic services.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
ipv4: Specifies the IPv4 address type.
ipv6: Specifies the IPv6 address type.
ipv6-pd: Specifies the IPv6-PD address type. This type of IPv6 addresses are generated based on
the DHCPv6 server-assigned prefix.
41