MA lighting dot2 User Manual page 95
Control console
Hide thumbs
Also See for dot2:
- User manual (614 pages) ,
- Quick manual (67 pages) ,
- Getting started manual (3 pages)
Table of Contents
Advertisement
executor will automatically be fixed and will stay visible. Anything that might be on that executor on the new page
will not be available before the other executor (from the previous page) isn't active anymore. When it becomes
inactive then it is automatically returned to the original page. This is called
Setup ->
Global
Settings.
You can also choose to fix the executors using the
Active executors have a brighter colored frame then non active faders. You can make an executor non-active by
pressing the
Off
key and then a key associated with the executor. Many executors will become non-active when the
fader reach 0%, but not the Special Masters (read below for more on this).
The executors can have different roles. The following is a description of them.
Cues
You can have cues and cue lists. When you store cues on an executor, then you get a cue list with one or more
cues.
Now you can play back these cues using the executor keys and faders.
This is the default use for Executors.
Chaser
A cue list can run in Chaser mode. Then it ignores the timing in the cue list and instead runs the cues in a loop with
an overall timing. This can be changed in the
Group Masters
You can store groups to executors and then you get groups masters. These can be used to limit the dimmer output
on the fixtures in the group. It doesn't affect other attributes (e.g. Pan/Tilt, Color, Gobo, etc.) than dimmer.
Special Masters
There are four special masters available. They can be found in the
to executors - it only makes sense to have them on a fader executor.
This is a short description of the four masters:
Master Speed
This master controls the speed of the effects stored in cues and the chaser speed.
It's a global time and will affect all executors. It can be disabled in the
if you don't want it to follow the master.
When this is active, then you'll see a
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Fix commands
and Key.
Settings of Executor
icon next to your command line on the right screen.
Autofix
and can be globally disabled in
menu.
Magic Speed
view, but they can also be assigned
Settings of Executor menu
for each executor
95
Advertisement
Table of Contents
