MA lighting dot2 User Manual page 222

d o t 2 U s e r Ma n u a l
The x-axis of the color picker, displays the hue from 0 to 360 degrees.
The y-axis of the color picker, displays the saturation from 0 % to 100 %.
The cross hairs shows which color is selected.
Bright.-Fader
To select the brightness, swipe the up or down.
Q-Fader
To select from which color attributes should the selected color mostly be mixed from, swipe the up or
down.
Primary
= The selected color will be mixed only from RGB attributes.
Max
= The selected color will be mixed from RGB attributes and if available from additional attributes, e.g. white or
amber.
Pure
= The selected color will be mostly mixed from additional color attributes.
Fader View
The fader view is the second tab of the color preset type view.
Figure 2: Fader View
In this view, you select the color from the color faders.
There are three different ways of the color mix system, each with three faders.
1. Hue - Sat. - Bright.
First fader displays the hue in degrees.
Second fader displays the saturation in percent.
Third fader displays the brightness in percent.
2. Cyan - Magenta - Yellow
First fader displays the cyan ratio in percent.
222
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com