Important:
The pan and tilt sliders works absolute. A tap on the pan or tilt slider sets a new pan or tilt value and
does not follow the already set pan or tilt values.
The respective encoders works relative to the already set pan or tilt values.
Pan Slider:
To select the pan value, move the slider up or down.
Tilt Slider:
To select the tilt value, move the slider up or down.
To bring the fixture type into the center position, tap Center .
Rightmost of the view are several buttons to adjust the position values.
There are two functions to adjust pan and tilt together.
Flip:
To change the pan and tilt combination and point your fixture in the same direction, tap Flip . The values are
active in the programmer.
Home:
To bring the pan and tilt to the center position, tap Home . The values are active in the programmer.
There are six different align functions.
Align is a function to adjust the position values from the fixtures in the selected order. The Align buttons have the
same function as the
Align
Align >:
To adjust from high to small.
Align <:
To adjust from small to high.
Align ><:
To adjust from the high to small to the middle and from the middle from small to high.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
key. For more information, refer to
Align
Key.
308