MA lighting dot2 User Manual page 23

d o t 2 U s e r Ma n u a l
Figure 1: Light Plot - only dimmers.
So let's add those 12 dimmers to the setup in the console (don't worry, we'll add more fun stuff later).
key. Now turn the rightmost encoder until it says " Select
Ignore what your screen says and just press the Setup
Patch & Fixture Schedule " and then shortly press the encoder.
Notice how the external screen (and screens 3 to 5, if you have them) now shows you the help file for this view.
Please ignore it for now - I'm going to tell you what to do and what's what.
Press on the right side of screen 1 where it says Add New Fixtures .
Add New Fixtures window
This gives you . All the green areas can be adjusted to make sure we add the correct
fixtures.
There are already a generic dimmer fixture selected in the 'Type' (don't worry about the number "2" and the "00"
part of the name).
We need to change the quantity to 12. The best way to do this is by turning the second encoder from the left until it
says " Quantity 12 ".
We want to have a Fixture ID that begins with number 1 and the name can be changed later (so can the rest by the
way). We are also happy with patching them to universe 1 and from the first address and forward. It should look like
this when we are gone with our adjustment:
23
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com