Unpark Command - MA lighting dot2 User Manual

The first cue of the cue list will be executed.
The top command is basically a
Syntax
1. Jump directly to the top of a cue list from an executor.
Top Executor 1
2. Jump with fade time to the top of a cue list from an executor.
Top Executor 1 Fade 3
Example 1
Let´s assume you will jump directly to the top of a cue list from the executor 1.
To get a dimmer output, make sure that the fader of an exutor is not at 0 %.
If the fader is at 0 % you get no dimmer output.
There are three ways to do this:
a) Press + Flash (=Top) and the respective executor button
b) Press + Flash (=Top)
c) Press + Flash (=Top) and tap on the respective executor in the
The first cue of the cue list will be executed.
Example 2
Let´s assume you will jump to the top of a cue list from executor 1 with the fade time of 3 seconds.
Press + Flash (=Top)
The first cue of the cue list will be executed with a fade time of 3 seconds.
Related Links
MA Key
Goto Command
Goto Key
Exec (Executor) Key

8.66. Unpark Command

This page describes the syntax and how to use the unpark command.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Goto command.
Exec 1 Please .
Exec 1 Time (=Fade)
.
executor bar
3 Please .
view.
463