MA lighting dot2 User Manual page 472

Multipatch fixture functionality
New in this release
New Create Multipatch button in Setup/Patch and Fixture Schedule.
Select Fixture IDs first to create multiple DMX patch addresses in Patch and Fixture Schedule.
It additionally creates new fixture objects in the dot2 3D.
For more information, see Patch and Fixture
Improved executor operation
New in this release
The main executor can be moved or copied to all other executors and vice versa. If e.g. the main executor
should be moved to page 1 executor 6 using the command line, type in the command "Move Executor 0.1.1 at
1.6"
Executors have the "Swop" function as additional button function. "Swop" is the same as a "Flash" button, but in
addition all dimmer attributes from other executors jump to zero.
Executors have an additional "Swop Protect" function.
To see the executor number and the fader icon, press and hold
Assignable DMX ports
New in this release
Setup / Sessions dialog. Here you can assign the DMX out universes to every single XLR 5 output connector.
This works standalone, or in a network session for all consoles, and dot2 Node4 devices.
It´s also possible to assign one DMX universe to multiple XLR ports.
Auto Save
New in this release
New function in the backup: Auto Save on first encoder.
Possible options are:
Off
every 15 minutes
every 30 minutes
every 60 minutes
every 120 minutes
New icon in title bar of load show window: "Show backup files". User can load up to 11 old versions of show files.
The show file name ends with .backup.
Every double click on Backup
For more information, see Backup window.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Schedule.
creates also backup files.
.
472