MA lighting dot2 User Manual page 464

To go to the unpark command, press and hold
Unpark is in the command
Description
With the Unpark command, you unpark previous parked DMX channels
of a fixture
of preset type attributes from a fixture selection
Parked channels are displayed with a blue background in the
To unpark all previous parked DMX channels, open the
Syntax
1. Unpark a previous parked fixture.
Unpark Fixture 1
2. Unpark a previous parked DMX channel.
Unpark Dmx 1.34
3. Unpark preset type attributes of the current fixture selection.
Unpark PresetType Dimmer
Example 1
Let´s assume you will unpark the previous parked fixture 1.
There are two ways to do this:
a) Press and hold + small
b) Press and hold + small
Fixture 1 is unparked.
Example 2
Let´s assume you will unpark the previous parked DMX channel 1.34.
There are two ways to do this:
a) Press and hold + small
b) Press and hold + small
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
+ small
line.
Go+ (=Unpark) and tap at fixture 1 in the
Go+ (=Unpark) Fixture 1 Please
Go+ (=Unpark) and tap at the DMX channel 1.34 in the
Go+ (=Unpark) DMX 1 . 3 4 Please
Go+ (=Unpark) at the console.
DMX view.
tools window.
fixtures view.
.
.
DMX view.
464